Before jumping into how to install grid tie power inverters USA, we have to know what is grid tie inverter, its benefits and why should people use it. Let’s go through one by one-
1). What is grid tie power inverter?
A Grid Tie Power inverter is an electronic device that converts DC (Direct Current) to AC (Alternating Current) suitable for operating in parallel with the electric utility grid.
2). Benefits of using it-
Higher efficiency results in better savings- Because of its ability to generate more electricity, grid-tie inverters have come a long way in helping people save more money. And with net metering people can reserve the excess electricity onto the utility grid.
Reliability- These inverters are one of the most reliable sources of power backup. Shutting down itself in the event of power grid failure is one of the best features of grid-tie inverters.
3)Reasons a lot of people use Grid Tie Inverters in the USA- Because of its ability to convert Direct Current into Alternating Current, to maintain the output voltage at a higher rate than the grid voltage, its benefits, and easy installation process, people often tend to use Grid Tie power inverters instead of other quality inverters.
How does the installation process carry out?
Step 1- Selecting the right location
The inverter should be located installed in a well-ventilated area where temperatures should not exceed -13 degrees Fahrenheit. Inverters should mount in a vertical position having a minimum 500 mm clearance from the ground.
Step 2- Mounting the Inverter
The inverter should be mounted vertically using a wall mount and a minimum 500 mm clearance should be kept from all sides.
Step 3- Solar Panel Connection to Inverter
After having the solar panels in place and before connecting them to the inverter we need to make sure that the circuit voltage is within the limit of the inverter.
Step 4- Connecting the solar panels to the inverter
Before establishing a connection with the solar panels, make sure that the positives and negatives of the inverter are connected to their respective counterparts of the DC-MCB.
Step 5- Connection to the grid
Connect the output of the inverter to the AC-MCB and then to the mains supply. But before carrying out the procedure switch off the mains supply.
After having completed all the steps, the installation would be done and you can start using the inverter in a full-fledged manner.